Download

Download WolkPos

One installer for both server and cashier computers. After installing, you can use the program free for 3 days.

Download WolkPos 1.3.0

Windows 10 and 11, 64-bit · 57.2 MB

Version
1.3.0
Size
57.2 MB
Released

SHA-256

fd99e2938cebb04e0142c249a74ff7313580aa1fdffec32feeb7a7cbb8b8b060

PowerShell

To make sure the file was not changed during download, run this command in PowerShell and compare the result with the checksum above:

Get-FileHash .\WolkPos-Setup-1.3.0.exe -Algorithm SHA256

System requirements

  • Windows 10 or Windows 11, 64-bit
  • Administrator rights to install
  • Microsoft Edge (comes with Windows). Without Edge, the program opens in your regular browser.
  • For several registers: computers on the same local network (cable or Wi-Fi)
  • Internet only for the license: starting the trial, activating the key and the daily check
  • For receipts: an 80 mm printer installed in Windows
  • Barcode scanner: optional

Installation

During installation you choose the type of computer. If your store has one computer, choose “Server computer”.

Server computer

The program and the database run on this computer. Choose it for a single-computer store too.

  1. Run the file. When Windows asks for permission, click “Yes”: installation needs administrator rights.
  2. Choose a language and accept the license agreement.
  3. Choose “Server computer” as the installation type and click “Install”.
  4. The installer sets up the database and Windows services by itself. This can take a few minutes.
  5. The last page shows the address for the registers, for example http://SHOP-PC:5090. Write it down.
  6. Open WolkPos and create the administrator account.

Cashier computer

Only a shortcut is installed here: the program connects to the server computer over the local network.

  1. First install the server computer and make sure it is switched on.
  2. On the cashier computer, run the same file and choose “Cashier computer” as the installation type.
  3. Enter the server address: an IP address or computer name, for example 192.168.1.10. Leave the port at 5090 unless it was changed.
  4. Finish the installation and open the program with the WolkPos shortcut on the desktop.

If a register can’t connect to the server, check the network profile on the server computer: it must be “Private”. Windows often marks a new network as “Public”, and in that profile the WolkPos port stays closed.

If Windows says “unknown publisher”

The installer is not yet signed with a digital certificate, so Windows SmartScreen may show a warning the first time you run it. This is normal for new programs.

  1. In the “Windows protected your PC” window, click the “More info” link.
  2. The publisher will be shown as “Unknown publisher”. Click “Run anyway”.

If your browser says the file is not commonly downloaded, choose “Keep” from the menu next to the file.

Download the file only from wolkpos.com. If in doubt, compare the SHA-256 checksum with the one above.

Start the trial

  1. Open WolkPos and create the administrator account.
  2. On the home screen, click “Start the 3-day free trial”. The same button is in Settings → License.
  3. The computer must be connected to the internet at this moment. The trial lasts 3 days, and you can use 2 registers.

Enter the license key

  1. When you buy a license, WolkPos gives you a key like WP-XXXX-XXXX-XXXX.
  2. In Settings → License, choose “I have a license key”, paste the key and click “Activate”.
  3. Everything you entered during the trial is kept.

No internet? Settings → License → “Offline activation” shows this computer’s code. Send it to WolkPos and paste the license text you receive (it starts with WPL1.) in the same place.

Good to know

Backups

Every day the program saves a copy of the database to C:\ProgramData\WolkPos\backups and keeps it for 14 days. Copy the backups to an external drive or USB stick from time to time — you will need them if the computer breaks down.

Updates

When a new version comes out, download and run the installer. The database and settings are kept, and the program updates the database itself when it starts.

Frequently asked questions